• News
  • Products
  • Technical information
  • CAD downlord
  • Company Profile

Home |  ASK Products |  Rolling Guide Systems

Rolling Guide Systems

製品カテゴリ一覧
  • ASK Products information
  • ASK Hepco
  • ASK-BWC V guide
  • Bosch Rexroth
  • RGS ~ Rolling Guide Systems
  • Ball Bushings
  • Ball Bushing units
  • Shafts
  • ASK Miniature Guide
  • Feed screws
製品概要

ASK’s Rolling Guide System (RGS) and ASK-Hepco's Precision Ring & Track systems(PRT2) offer speed, silent operation and easy assembly in a way linear guides cannot. Unlike guides that allow movement only along a straight line, the RGS and PRT2 can be configured as a perpetual cycle, a 360° circular arc, or in any other curve and straight line combination. The RGS and PRT2 are simple, customizable and can be procured at low cost. Customers who switched to the RGS and PRT2 after using standard recirculating ball bearing units have been extremely satisfied with the results. (Available in steel or stainless steel)

Features
img_landing_rgs
Advantages of the Rolling Guide System (RGS)
1.Design freedom using curves and straight lines (360° complete circular arc rail also available) 2.Simple configuration enables silent travel
3.High-speed travel (up to 8m/s) 4.Suitable for harsh environments
5.Lubrication not necessary 6.Simple rail connection
7.Bearings can traverse gaps in rails 8.Preload (torque) adjustment available to order
9.RGS Curve Motion System® for 3-D travel  

1. Design freedom using curves and straight lines (360° complete circular arc rail also available)
1,曲線+直線 無限設計さらに360°の完全な円弧レールもご用意

Curves and straight lines can be flexibly combined to construct perpetual cycles or complex lines. ASK can even provide on order a 360° complete circle with no joints(ASK-Hepco "PRT2").

このページの先頭へ

 2.Simple configuration enables silent travel
2、シンプルな構成で静音走行

The RGS and PRT2 achieve astonishingly quiet travel compared to standard recirculating ball linear guides as the steel balls do not make contact with the track. As well as reducing the noise generated by entire systems, minimizing noise helps to alleviate worker stress.

このページの先頭へ

3.High-speed travel (up to 8m/s)
3、高速走行(MAX 8m/秒)

Reaching a maximum 8m/s, the RGS and PRT2 are even faster than standard recirculating ball linear guides. Such previously-unattainable speeds offer enormous advantages in terms of improving equipment and system efficiency and shortening production time.

このページの先頭へ

4. Suitable for harsh environments
4、悪環境下での使用が可能

Unlike recirculating ball guides, the steel balls do not run directly over the track, making the RGS and PRT2 superior at keeping out foreign particles and therefore recommended for harsh environments, where cutting oil is used for example, or in the presence of powder or dust.

このページの先頭へ

5. Lubrication not necessary
6、無潤滑走行可能

Simple construction means the RGS and PRT2 can be used without lubrication. Regular maintenance is also easy, allowing a reduced lubrication frequency after initial lubrication. This feature makes the RGS and PRT2 ideal for when lubricant use is inappropriate or follow-up lubrication is difficult.

このページの先頭へ

6. Simple rail connection
7、レールのつなぎ取付が簡単

Simple rail construction makes assembly, installment and connection easier with the RGS and PRT2 compared to ordinary linear guides, thereby cutting the time and hassle it takes to extend, shorten or reconfigure systems and lines. This helps to improve efficiency by facilitating line modifications, as well as operating hour and output adjustments, in busy or slow periods.

このページの先頭へ

7. Bearings can traverse gaps in rails
8、隙間のあるレール繋ぎ仕様でも乗り移り可能

RGS and PRT2 bearings are able to traverse small gaps in rail joints. It is therefore possible, for example, to insert a partition between two connected environments or processes, or even a junction.

このページの先頭へ

8. Preload (torque) adjustment available to order
9、予圧(トルク)再調整が容易

ASK will set preloads prior to delivery. Extra adjustments can be made simply by tightening the nuts.

このページの先頭へ

9. RGS Curve Motion System® for 3-D travel
5、3次元軌道走行 RGSカーブモーションシステム®

In addition to movement across a flat plane, the RGS Curve Motion System® incorporates motion through three-dimensional space and twisted rails to realize special set-ups with freedom of movement similar to a roller coaster. ASK will use proprietary know-how (patent application filed) to help you develop unique designs.

このページの先頭へ

Please feel free to use of CAD data download, the request of material, and the question.

  • CADデータダウンロード
  • お問い合わせ
  • カタログ資料請求

入力フォーム読み込み中…フォームが表示されない場合

このページの先頭へ