• News
  • Products
  • Technical information
  • CAD downlord
  • Company Profile

Home |  ASK Products |  Shafts

製品カテゴリ一覧
  • ASK Products information
  • ASK Hepco
  • ASK-BWC V guide
  • Bosch Rexroth
  • RGS ~ Rolling Guide Systems
  • Ball Bushings
  • Ball Bushing units
  • Shafts
  • ASK Miniature Guide
  • Feed screws

ASK Products

ASK is creator, producer and provider of an extensive range of quality, high-performance products.

Shafts

CS
CS

CS-series shafts are surface-hardened straight solid shafts made of bearing steel (SUJ-2). Additional processing is possible in areas other than the hardened layer.

SCS
SCS

SCS-series shafts are surface-hardened straight solid shafts made of martensitic stainless steel (SUS440C) or equivalent material. Additional processing is possible in areas other than the hardened layer. They are suitable for when protection from rust is required.

PCS
PCS

PCS-series shafts are surface-hardened hollow shafts made of bearing steel (SUJ-2). They offer enormous advantage in lowering system weight and energy consumption. The hollow center of the pipe may also be used for enclosing control equipment cables or oil tubes, therefore enabling compact and elegant system design.

OP
OP

OP-series shafts are used as slide shafts for SB-OP and SLS-OP, or combined with rails to form the SG series. Surface treatment and additional processing are possible. OP-series dimensions allow use of SR-series support rails.

NP
NP

These custom shafts include specially-machined shafts, machined pipe shafts, machined stainless steel shafts, and hard chrome or other surface-treated shafts. They are special shafts made for specific ball bushing applications and have undergone processing such as stepped thread cutting.

SR
SR

Shaft support used mainly in combination with SG-series units. Made of an aluminum alloy.

SRY
SRY

Shaft support used mainly in combination with SGY-series units with a side opening and which come with a rail. Made of an aluminum alloy.

このページの先頭へ

Shafts Support
SN-A
SN-A

Support unit for horizontal shafts. The unit is made of aluminum and has undergone alumite surface treatment. Shafts used with ball bushings can be inserted directly into the supports without any special processing of the shaft ends and are fixed in place by tightening the clamp bolt.

SNF-A
SNF-A

Support unit for vertical shafts. The unit is made of aluminum and has undergone alumite surface treatment. Shafts used with ball bushings can be inserted directly into the supports without any special processing of the shaft ends and are fixed in place by tightening the clamp bolt.

このページの先頭へ

Please feel free to use of CAD data download, the request of material, and the question.

  • CADデータダウンロード
  • お問い合わせ
  • カタログ資料請求

このページの先頭へ

入力フォーム読み込み中…フォームが表示されない場合

このページの先頭へ